Underwater ROV‎ > ‎Research‎ > ‎arduino wiring‎ > ‎

Arduino Accelerometer breakout

http://wiring.org.co/learning/basics/accelerometer.html





int x, y, z; 

void setup()
{
  Serial.begin(9600);           // sets the serial port to 9600
}

void loop() 
{
  x = analogRead(0);       // read analog input pin 0
  y = analogRead(1);       // read analog input pin 1
  z = analogRead(2);       // read analog input pin 1
  Serial.print("acceleretations are x, y, z: ");
  Serial.print(x, DEC);    // print the acceleration in the X axis
  Serial.print(" ");       // prints a space between the numbers
  Serial.print(y, DEC);    // print the acceleration in the Y axis
  Serial.print(" ");       // prints a space between the numbers
  Serial.println(z, DEC);  // print the acceleration in the Z axis
  delay(100);              // wait 100ms for next reading
}
ą
tim hettinger,
Apr 25, 2010, 8:12 AM
Comments